Walkera Dragonfly 04 RC Helicopter, Vastly Improved Flying

I’ve vastly improved the flight of my Dragonfly! Modifying the throttle to remove the click-stops, and changing how I hold the stick made an instant improvement in my hovering; and, I now have much finer control of thrust and elevation.

Fun Sites

You can leave a response, or trackback from your own site.

21 Responses to “Walkera Dragonfly 04 RC Helicopter, Vastly Improved Flying”

  1. toybuilder says:

    Hey, fellow Walkera owners, how do you hold your controller?

  2. vega2614 says:

    Nice work. I have a friend with a Walkera 60 and he can’t hold a stable hover like that in such a small space. I’ll have to tell him about your click removal mod. I have an E-Sky Lama that could benefit from that as well. Which Walkera number is the one you’re flying in the video?

  3. toybuilder says:

    Thanks!
    It’s the Dragonfly 04 – I updated the video title.

  4. djjelly24 says:

    Well I am not so sure how good is moding it like that as you can accidentally crash it much easier… but I find that it is annoying to have the clicking with a fixed pitch heli… You are really brave flying it in such a small space… :)

  5. toybuilder says:

    I find it much easier to adjust my hover without the click. While it’s now a little easier to “droop” the throttle while applying right rudder, I like it better this way.

    I feel reasonably comfortable flying in a small space now… The room is about 6′ x 6′.

  6. djjelly24 says:

    Fair enough :) I might try it as long as I can put it back

  7. toybuilder says:

    It is just a small screw that you loosen and then move the spring arm. It can easily be put back into place. You can also slightly adjust the arm to increase/decrease the click tension if you want to.

  8. djjelly24 says:

    The most annoying thing for me is the trim click… because every click is not always enough to adjust it :S

  9. Elyesicoman says:

    Thanks for your comment, you’ve got it good too!
    I use my controller without any trims, i’ve tried to have the best fit on rotor’s linkages, that’s better ’cause walkera transmitter’s trims are too uncertains…

  10. Elyesicoman says:

    I post a video response where you can see the same exercise, but with a zoom 400 sized…

  11. computergeekxd says:

    Star Wars text!

  12. yeogav says:

    I got one of these choppers. Forget modding the TX lol get a lipo battery and extreme skids and cabon fibre blades! coooool

  13. Computergaz says:

    You will find the DF4 will fly much better with SuperSkids / Extreme Skids applied. The hovering ability is just so much better, and no need to modify the controllers.

  14. fowse says:

    what did you change on the controller?

  15. homersparents says:

    I would like to know what mode you fly in 1,2,3,4

    i set up my FSM the way i thought it would be best…learned to lfy pretty nice too. then i found out my settings where just like mode 4. not used much in USA…so what is the best b=mode for helies

  16. homersparents says:

    i meant MODE for the controller…sorry for the speliing (IE b=mode) I just meeant “mode

  17. toybuilder says:

    I don’t know the mode #.

    The rudder, throttle is on the left.
    Pitch/Roll is on the right.

  18. snifferfox says:

    Is it easy to fly.

  19. kennyvanweert says:

    Mode 2.

  20. kennyvanweert says:

    I totally agree with you, my DF 04 used to shake alot and the landing skid let loose sometimes and after I installed the super skids it fly’s extremely stable.

  21. xtom1973 says:

    hey, nice one. its so simple that i never thought of the neckholder. but its clear that it must be much better. i bet this will improve my little flights much better.
    (it seems you can use a potbelly-stand, too =) *kidding*

Leave a Reply

This site uses CommentLuv and KeywordLuv. Enter YourName@YourKeywords in the Name field to take advantage.DoFollow - CommentLuv Enabled

This site uses KeywordLuv. Enter YourName@YourKeywords in the Name field to take advantage.

Amazon affiliate disclosure: aviationbrothers.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Easy AdSense by Unreal